Dulux Weathershield Smooth Masonry Paint

Key Information

Weathershield Smooth Masonry Paint

Dulux Weathershield Smooth Exterior Masonry paint has been specially formulated to protect Ireland's homes against our unique climate. Using pure acrylic technology, Weathershield with advanced durability, is our most protective masonry paint yet, giving you that freshly painted look for longer. It has an established reputation for outstanding durability and contains a special fungicide and algicide to help control surface growths. It has a smooth finish making it easy to apply, spread further and stay clean for longer.

Formulation
Water-based
Pack size
250ml (except for Brilliant White and Black),5L,10L (Bitter Chocolate, Black, Magnolia, Merlin, Spice and Terracotta are also available in 2.5L)

Application Information

Coverage
14-16m²/litre
Touch dry
30 minutes dependent upon temperature / humidity
Recoatable
2-4 hours. These times will be significantly longer in cold, damp conditions.
Thinning
Brush or roller application: for sealing new or bare surfaces, 1 part clean water to 5 parts paint.

For normal use: thinning should not exceed 1 part clean water to 10 parts paint.
Application
Roller or brush

Available Colours

Colour Mixing

Now available in a wider selection of colours?

The Weathershield colour palette makes choosing your exterior colour as simple as possible.

Over 400 specially selected colours available on the Dulux colour mixing system.

Weathershield Smooth Masonry Paint is specially developed for exterior masonry. It has an established reputation for outstanding durability and contains a special fungicide and algicide to help control surface growths. It has a smooth finish making it easy to apply, spread further and stay clean longer.

Ask your local Dulux stockist for details »

colours

System Information

Datasheets

To get the best results make sure allow all new surfaces to dry out completely. Wash down previously painted surfaces with a detergent solution to remove dirt, grease, chalking paint etc. where practicable. Rinse off with clean water and allow to dry. Carefully scrape back to a firm edge all areas of poorly adhering or defective coatings and rub down thoroughly to 'key and feather' broken edges of existing coatings. The normal finishing process is 2 full coats of Dulux Trade Weathershield Smooth Masonry Paint, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. After use, remove as much paint as possible from brushes before cleaning with clean water.

datasheet
Download a PDF datasheet for Dulux Weathershield Smooth Masonry Paint
safety datasheet
Download a PDF safety datasheet for Dulux Weathershield Smooth Masonry Paint