Dulux Trade Weathershield Fungicidal Wash

Dulux Trade Weathershield Fungicidal Wash
Size
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish N/A
  • Coverage Up to 25m² per litre, but will vary considerably depending on absorbency of the surface.
Product Features
  • EASY TO APPLY

Product Description

Dulux Trade Weathershield Multi-Surface Fungicidal Wash is designed for cleaning all bare or painted wood and masonry surfaces contaminated with moulds, algae and lichen. Suitable for brush application only.

Application Description

Brush only. Do not spray. SHAKE THOROUGHLY BEFORE USE. Apply by brush to all affected areas. Leave for 24 hours then thoroughly rinse and scrub with water to remove residues and dead growth; failure to do this may result in discolouration of subsequently applied coatings. Repeat the process if necessary. On badly affected areas the use of high pressure water-hosing may be necessary to remove all organic growth completely. Do not apply in wet weather.

Health & Safety

Causes serious eye irritation. Causes skin irritation. Harmful to aquatic life with long lasting effects.

Tips & Advice

  • 1. Cleaning
    After use, remove as much wash as possible from brushes before cleaning with water.
  • 2. Storing
    Do not use or store in extremes of temperature and protect from frost.
Fetching the data, please wait...