Dulux High Gloss

Size
Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Gloss
  • Coverage up to 18m²/L
  • Drying Time Touch Dry: 4-6 Hours Recoatable: 16-24 Hours
  • Coats 2
Product Features
  • HIGH COLOUR DURABILITY
  • HIGH GLOSS FINISH

Product Description

Dulux High Gloss is a solvent-based finish suitable for the protection and decoration of most interior and exterior surfaces where a durable high gloss finish is required.

Application Description

Apply with a roller or brush. For Health and Safety reasons relating to solvent based paint, spray application is not recommended.

Health & Safety

Contains- Naphtha (petroleum), hydrotreated heavyFlammable liquid and vapour. May cause drowsiness or dizziness.Keep out of reach of children. If medical advice is needed, have product container or label at hand Keep away from heat, sparks, open flames and hot surfaces. - No smoking. Keep container tightly closed. Do not get in eyes, on skin, or on clothing.Call a POISON CENTER or doctor/physician if you feel unwell. Keep cool. Dispose of contents and container in accordance with all local, regional, national or international regulations.Contains 2-butanone oxime. May produce an allergic reaction. Repeated exposure may cause skin dryness or cracking. Avoid the inhalation of dust. Wear suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. EU limit value for this product (cat A/d): 30g/l (2010). This product contains max. 299g/l VOC. For further information contact Dulux Paints Ireland Ltd Dulux Paints Ireland Commons Road, Cork Tel 021 4220222 Made in EU
  • DU_IE_EN_(IE)_HIGH_GLOSS.pdf
  • DU_IE_EN_(IE)_HIGH_GLOSS.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    To get the best results with Dulux High Gloss make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).

    Remove all loose and defective paint. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

    Where necessary, wash the surface to remove dirt, grease and powdery or dusty residues. Rinse with clean water and allow to dry. Seal surfaces that remain powdery after thorough preparation with an appropriate plaster sealer.

    Where necessary, rub down and then wipe off with a damp, lint free cloth to avoid dust.

    Any surface defects should be filled with the appropriate Polycell Polyfilla.
  • 2. Cleaning
    After use, remove as much product as possible from equipment before cleaning with brush cleaner
  • 3. Storing
    Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright