Dulux Trade Weathershield Stabilising Primer

Size
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish N/A
  • Coverage Up to 10m² per litre
  • Coats 2
Product Features
  • LONG LASTING PROTECTION

Product Description

Dulux Trade Weathershield Stabilising Primer is a solvent-based primer specially formulated to seal unstable areas which remain powdery and chalky after the surface has been thoroughly prepared for painting with Weathershield Masonry Paints.

Application Description

Brush or roller only. For Health and Safety reasons related to all solvent-based paints, spray is not recommended. SHAKE CONTAINER VIGOROUSLY BEFORE USE. When the surface has been fully prepared any areas that remain powdery and chalky should be sealed with a coat of Weathershield Stabilising Primer. When fully dry apply 2 coats of the selected Weathershield Masonry Paint. Weathershield Stabilising Primer should not be used as a general purpose sealer on normal or sound surfaces (i.e not powdery and chalky after the surface has been thoroughly prepared). New or sound bare surfaces should only be sealed with a thinned first coat of the masonry paint itself.

Health & Safety

If there is contact with the eyes, immediately rinse with a lot of water and get medical help. If in contact with the skin immediately wash with soap and water or proper skin cleanser. Do not use solvents or thinners when in contact with the eyes/skin.
  • dulux_trade_weathershield_stabilising_primer_tds.pdf
  • dt_gb_en_weathershield_stabilising_primer.pdf

Tips & Advice

  • 1. Cleaning
    After use, remove as much product as possible from brushes before cleaning with brush cleaner
  • 2. Storing
    Do not use or store in extremes of temperature and protect from frost