Dulux Weathershield Quick Dry Exterior Gloss

Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish High-gloss
  • Coverage Up to 13m² per litre
  • Drying Time Drying Time: 2 hours
    Recoat after 4-6 hours
  • Coats 2
Product Features

Product Description

This water-based formulation has excellent flow and levelling for a smooth high gloss finish. Specially developed to give exterior woodwork extensive protection for up to 8 years*. It offers great flexibility to accommodate the natural movement of wood that occurs over time. It contains a fungicide to inhibit mould growth within the paint film and help it stay cleaner for longer. *if correctly applied as per instructions for use.

Application Description

Application: Brush only. Do not spray. STIR THOROUGHLY BEFORE USE. Prime all bare wood with 2 coats of Weathershield Preservative Primer +(BP) followed by 1 coat of the appropriate coloured Weathershield Quick Dry Exterior Undercoat. Finish with 2 coats of Weathershield Quick Dry Exterior Gloss. Where a special process colour is to be used or a strong colour change is required, additional coats will be required (see appropriate Dulux Trade colour card). Allow a minimum of 2 hours before overcoating Weathershield Quick Dry Exterior Undercoat. Allow up to 4 hours before applying a second coat of Weathershield Quick Dry Exterior Gloss.

Health & Safety

Harmful to aquatic life with long lasting effects. - 0 - 0 - Contains - 1,2-benzisothiazol-3(2H)-one, C(M)IT/MIT(3:1) and 2-octyl-2H-isothiazol-3-one. - May produce an allergic reaction.
  • dt_ie_en_weathershield_quick_dry_exterior_high_gloss_medium_base.pdf
  • dt_ie_en_weathershield_quick_dry_exterior_high_gloss_light_base.pdf
  • dt_ie_en_weathershield_quick_dry_exterior_high_gloss_extra_deep_base.pdf
  • dtie_1022__weathershield_quick_dry_exterior_high_gloss.pdf
  • dt_ie_en_weathershield_quick_dry_exterior_high_gloss_pure_brilliant_white.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry).
  • 2. Cleaning
    After use, remove as much paint as possible from brushes before cleaning with water
  • 3. Storing
    Do not use below 10°C, immediately after rain, fog or frost, or when these conditions are forecast.