Dulux Weathershield Quick Dry Exterior Undercoat

Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage Up to 16m² per litre
  • Coats 2
Product Features

Product Description

Dulux Trade Weathershield Quick Dry Exterior Undercoat is specifically formulated to be used with Weathershield top coats to provide longer lasting protection for exterior woodwork. Its water-based formulation is quick drying and offers great flexibility to help absorb the natural movement of wood. Provides 8 year all weather protection when used as part of the full Weathershield exterior paint system.

Application Description

Application: Brush only. Do not spray. STIR THOROUGHLY BEFORE USE. Treat any knots in wood with an appropriate knotting solution. New or bare surfaces: Prime all bare wood with 2 coats of Weathershield Preservative Primer +(BP) followed by 2 coats of Weathershield Quick Dry Exterior Undercoat. Previously painted surfaces: 1 coat of Weathershield Quick Dry Exterior Undercoat. Finishing: Allow to dry for a minimum of 2 hours between coats, then apply the appropriate Weathershield topcoat.

Health & Safety

  • dt_ie_en_weathershield_quick_dry_exterior_flexible_undercoat_white.pdf
  • dt_ie_en_weathershield_quick_dry_exterior_flexible_undercoat_extra_deep_base.pdf
  • dt_ie_en_weathershield_quick_dry_exterior_flexible_undercoat_light_base.pdf
  • dtie_1020__weathershield_quick_dry_exterior_flexible_undercoat.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    For the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry). Treat any areas affected by mould, lichens and algae with a suitable fungicidal wash.
  • 2. Cleaning
    After use, remove as much paint as possible from brushes before cleaning with water
  • 3. Storing
    Do not use or store in extremes of temperature and protect from frost.