Surfaces must be sound, clean and dry before treating.
Remove all loose and defective coatings, if necessary stripping back to bare wood.
Prime all bare wood with 1 coat of Weathershield Exterior Preservative Primer including any new or bare replacement beading. Excess primer should be wiped off surrounding paintwork. Prime any bare metal with 1 coat of Dulux Trade Metal Primer.
Apply 1 coat of the appropriate coloured Dulux Weathershield Quick Dry Exterior Undercoat to all primed wood.
Apply a second coat of Dulux Weathershield Quick Dry Exterior Undercoat overall, followed by 1 coat of Weathershield Exterior Quick Drying Satin. Where a strong colour change is involved, 2 coats may be required. Allow a minimum of 2 hours before overcoating Dulux Weathershield Quick Dry Exterior Undercoat.
After use, remove as much paint as possible from brushes before cleaning with clean water.