Good to see you!
Welcome to Dulux
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
Delete Account
Dulux Weathershield Quick Dry Exterior Satin
Key Information
A trim product that has the flexibility and durability of the Weathershield system.
Contains fungicide to prevent mould growth.
Pack size
1L, 2.5L
Application Information
Coverage Touch dry Recoatable Thinning |
Up to 20m� per litre on most surfaces 1-2 hours dependent upon temperature / humidity 2-4 hours This product should not be thinned. Brush |
Key Benefits
Provides a fashionable satin finish.
Quick-drying and easy to apply.
Up to 6 years lasting protection.
Contains fungicide to help protect against the disfiguring effect of mould growth on its film.
Available Colours
- Available in over 620 colours
System Information
Surfaces must be sound, clean and dry before treating.
Remove all loose and defective coatings, if necessary stripping back to bare wood.
Prime all bare wood with 1 coat of Weathershield Exterior Preservative Primer including any new or bare replacement beading. Excess primer should be wiped off surrounding paintwork. Prime any bare metal with 1 coat of Dulux Trade Metal Primer.
Apply 1 coat of the appropriate coloured Dulux Weathershield Quick Dry Exterior Undercoat to all primed wood.
Apply a second coat of Dulux Weathershield Quick Dry Exterior Undercoat overall, followed by 1 coat of Weathershield Exterior Quick Drying Satin. Where a strong colour change is involved, 2 coats may be required. Allow a minimum of 2 hours before overcoating Dulux Weathershield Quick Dry Exterior Undercoat.
After use, remove as much paint as possible from brushes before cleaning with clean water.