Dulux Weathershield Smooth Masonry Paint

Key Information

Dulux Weathershield Smooth Exterior Masonry paint is Made in Ireland to protect Irish homes from our unique weather. The new Ultimate Durability formula with Superior Flexibility protects the paint from cracking and flaking, while Superior Colour Retention ensures colours stay true and Superior Mould Resistance works against mould and algae growth for longer thanks to slow-release encapsulated biocide technology. Dulux Weathershield Ultimate Durability is our most durable exterior paint ever.

Formulation

Water-based

Pack cize

250ml (except for Brilliant White and Black), 500ml (colour mixing base only), 5L, 10L (Bitter Chocolate, Black, Magnolia, Merlin, Spice and Terracotta are also available in 2.5L)

Application Information

 

Coverage

Touch dry

 

16m2/litre

30 minutes dependent upon temperature / humidity




2-4 hours. These times will be significantly longer in cold, damp conditions.

Brush or roller application: for sealing new or bare surfaces, 1 part clean water to 5 parts paint.

For normal use: thinning should not exceed 1 part clean water to 10 parts paint.

Roller or brush

 Recoatable

Thinning

Application

Available Colours

Colour Mixing

Now available in a wider selection of colours?

The Weathershield colour palette makes choosing your exterior colour as simple as possible.

Over 400 specially selected colours available on the Dulux colour mixing system.

Weathershield Smooth Masonry Paint is specially developed for exterior masonry. It has an established reputation for outstanding durability and contains a special fungicide and algicide to help control surface growths. It has a smooth finish making it easy to apply, spread further and stay clean longer.

Ask your local Dulux stockist for details »

System Information

To get the best results make sure allow all new surfaces to dry out completely. Wash down previously painted surfaces with a detergent solution to remove dirt, grease, chalking paint etc. where practicable. Rinse off with clean water and allow to dry. Carefully scrape back to a firm edge all areas of poorly adhering or defective coatings and rub down thoroughly to 'key and feather' broken edges of existing coatings. The normal finishing process is 2 full coats of Dulux Trade Weathershield Smooth Masonry Paint, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. After use, remove as much paint as possible from brushes before cleaning with clean water.

Datasheets

Download a PDF datasheet for Dulux Weathershield Smooth Masonry Paint
Download a PDF safety datasheet for Dulux Weathershield Smooth Masonry Paint