Dulux Weathershield Exterior Quick Drying Satin

Key Information

Weathershield Exterior Quick Drying Satin

A trim product that has the flexibility and durability of the Weathershield system.
Contains fungicide to prevent mould growth.

Pack size
1L, 2.5L

Application Information

Up to 20m² per litre on most surfaces
Touch dry
1-2 hours dependent upon temperature / humidity
2-4 hours
This product should not be thinned.

Key Benefits

Available Colours

Provides a fashionable satin finish.
Quick-drying and easy to apply.
Up to 6 years lasting protection.
Contains fungicide to help protect against the disfiguring effect of mould growth on its film.

  • Available in over 620 colours

System Information


Surfaces must be sound, clean and dry before treating.
Remove all loose and defective coatings, if necessary stripping back to bare wood.
Prime all bare wood with 1 coat of Weathershield Exterior Preservative Primer including any new or bare replacement beading. Excess primer should be wiped off surrounding paintwork. Prime any bare metal with 1 coat of Dulux Trade Metal Primer.
Apply 1 coat of the appropriate coloured Weathershield Exterior Flexible Undercoat to all primed wood.
Apply a second coat of Weathershield Exterior Flexible Undercoat overall, followed by 1 coat of Weathershield Exterior Quick Drying Satin. Where a strong colour change is involved, 2 coats may be required. Allow a minimum of 2 hours before overcoating Weathershield Exterior Flexible Undercoat.
After use, remove as much paint as possible from brushes before cleaning with clean water.

Download a PDF datasheet for Dulux Trade Weathershield Exterior Quick Drying Satin